Differences

This shows you the differences between two versions of the page.

--- host:genrepos [2016/12/15 08:19] – [raid] sloader
+++ host:genrepos [2016/12/28 10:08] (current) – [partition and raid] sloader
@@ Line 4: / Line 4: @@
 ===== install =====
-==== raid ====
+==== partition and raid ====
 <code>
-d
+# dd if=/dev/zero of=/dev/sdb bs=1024 count=5000
+# fdisk /dev/sdb
+# fdisk -l /dev/sdb
+Disk /dev/sdb: 232.9 GiB, 250000000000 bytes, 488281250 sectors
+Units: sectors of 1 * 512 = 512 bytes
+Sector size (logical/physical): 512 bytes / 512 bytes
+I/O size (minimum/optimal): 512 bytes / 512 bytes
+Disklabel type: dos
+Disk identifier: 0x35c9935e
+Device     Boot    Start       End   Sectors   Size Id Type
+/dev/sdb1  *        2048    206847    204800   100M 83 Linux
+/dev/sdb2         206848   4401151   4194304     2G 82 Linux
+/dev/sdb3        4401152  16984063  12582912     6G 83 Linux
+/dev/sdb4       16984064 488281249 471297186 224.7G  5 Extended
+/dev/sdb5       16986112  37957631  20971520    10G 83 Linux
+/dev/sdb6       37959680 488281249 450321570 214.7G 83 Linux
+# mdadm --create --raid-devices=2 --level=raid1 /dev/md0 /dev/sdb3 missing
+# mdadm --create --raid-devices=2 --level=raid1 /dev/md1 /dev/sdb6 missing
+# mkfs.ext2 /dev/sdb1
+# mkreiserfs /dev/md0
+# mkreiserfs /dev/sdb5
+# cryptsetup -y --cipher serpent-cbc-essiv:sha256 --key-size 256 luksFormat /dev/md1
+# cryptsetup luksOpen /dev/md1 crypt
+# mkreiserfs /dev/mapper/crypt
+</code>
+==== install base ====
+<code>
+# mount /dev/md0 /mnt/tmp
+# cd /mnt/tmp
+# wget -c 'http://ftp.halifax.rwth-aachen.de/gentoo/releases/amd64/autobuilds/current-stage3-amd64-nomultilib/stage3-amd64-nomultilib-20161208.tar.bz2'
+# tar xjpf stage3-amd64-nomultilib-20161208.tar.bz2
 </code>