Differences

This shows you the differences between two versions of the page.

--- host:genrepos [2016/12/16 07:05] – [partition and raid] sloader
+++ host:genrepos [2016/12/28 10:08] (current) – [partition and raid] sloader
@@ Line 18: / Line 18: @@
 Device     Boot    Start       End   Sectors   Size Id Type
 /dev/sdb1  *        2048    206847    204800   100M 83 Linux
-/dev/sdb2         206848   4401151   4194304     2G 82 Linux swap / Solaris
+/dev/sdb2         206848   4401151   4194304     2G 82 Linux
 /dev/sdb3        4401152  16984063  12582912     6G 83 Linux
-/dev/sdb4       16984064 488281249 471297186 224.7G 83 Linux
+/dev/sdb4       16984064 488281249 471297186 224.7G  5 Extended
+/dev/sdb5       16986112  37957631  20971520    10G 83 Linux
+/dev/sdb6       37959680 488281249 450321570 214.7G 83 Linux
 # mdadm --create --raid-devices=2 --level=raid1 /dev/md0 /dev/sdb3 missing
-# mdadm --create --raid-devices=2 --level=raid1 /dev/md1 /dev/sdb4 missing
+# mdadm --create --raid-devices=2 --level=raid1 /dev/md1 /dev/sdb6 missing
 # mkfs.ext2 /dev/sdb1
 # mkreiserfs /dev/md0
+# mkreiserfs /dev/sdb5
 # cryptsetup -y --cipher serpent-cbc-essiv:sha256 --key-size 256 luksFormat /dev/md1
 # cryptsetup luksOpen /dev/md1 crypt
 # mkreiserfs /dev/mapper/crypt
+</code>
+==== install base ====
+<code>
+# mount /dev/md0 /mnt/tmp
+# cd /mnt/tmp
+# wget -c 'http://ftp.halifax.rwth-aachen.de/gentoo/releases/amd64/autobuilds/current-stage3-amd64-nomultilib/stage3-amd64-nomultilib-20161208.tar.bz2'
+# tar xjpf stage3-amd64-nomultilib-20161208.tar.bz2
 </code>