Differences

This shows you the differences between two versions of the page.

--- setup:v_marduk [2019/10/01 06:57] – created sloader
+++ setup:v_marduk [2019/10/18 08:23] (current) – sloader
@@ Line 1: / Line 1: @@
 === setup v_marduk ===
-host:
+== host as root ==
 <code>
+echo 1 >  /proc/sys/net/ipv4/ip_forward
+emerge -1av bridge-utils usermode-utilities
 mkdir /mnt/virt
 chown -R sloader:users /mnt/virt
+brctl addbr br0
+ifconfig br0 192.168.168.1 netmask 255.255.255.0 up
+tunctl -b -u sloader -t tap0
+brctl addif br0 tap0
+ifconfig tap0 up 0.0.0.0 promisc
+</code>
+host as sloader:
+<code>
+qemu-img create -f qcow2 marduk.img 10G
+</code>
+start_marduk_cd.sh
+<code>
+#!/bin/bash
+qemu-system-x86_64 \
+  -vnc 192.168.178.111:0 \
+  -cpu host \
+  -smp 2 \
+  -drive file=marduk.img,if=virtio,media=disk \
+  -m 2048 \
+  -k de \
+  -net nic,macaddr=00:00:00:00:00:01,model=virtio \
+  -net tap,ifname=tap0,script=no,downscript=no \
+  -cdrom systemrescuecd-6.0.3.iso \
+  -boot d \
+  -enable-kvm
+</code>
+start_marduk_disk.sh
+<code>
+#!/bin/bash
+qemu-system-x86_64 \
+  -cpu host \
+  -smp 2 \
+  -drive file=marduk.img,if=virtio,media=disk \
+  -m 1024 \
+  -k de \
+  -vga none \
+  -nographic \
+  -net nic,macaddr=00:00:00:00:00:01,model=virtio \
+  -net tap,ifname=tap0,script=no,downscript=no \
+  -enable-kvm &
+</code>
+in vm
+<code>
+bash
+passwd
+net-setup eth0 # to 192.168.168.3/24 gw 192.168.168.1
+</code>
+== switch so ssh ==
+<code>
+fdisk /dev/vda
+Device     Boot   Start      End  Sectors  Size Id Type
+/dev/vda1          2048   309247   307200  150M 83 Linux
+/dev/vda2        309248  4503551  4194304    2G 83 Linux
+/dev/vda3       4503552 20971519 16467968  7.9G 83 Linux
+mkfs.ext2 /dev/vda1
+mkswap /dev/vda2
+swapon /dev/vda2
+mkreiserfs /dev/vda3
+mount /dev/vda3 /mnt/gentoo
+mkdir /mnt/gentoo/boot
+mount /dev/vda1 /mnt/gentoo/boot
+cd /mnt/gentoo
+tar xpf stage3-amd64-nomultilib-20191016T214504Z.tar.xz
+mkdir usr/portage
+mkdir var/distfiles
+/etc/init.d/rpc.statd start
+mount.nfs 192.168.168.1:/usr/portage /mnt/gentoo/usr/portage
+mount.nfs 192.168.168.1:/var/distfiles /mnt/gentoo/var/distfiles
+mount -o bind /dev /mnt/gentoo/dev
+mount -t proc none /mnt/gentoo/proc
+chroot /mnt/gentoo /bin/bash
+</code>
+== base sys ==
+<code>
+nano -w /etc/portage/make.conf
+eselect profile set 11
+env-update
+emerge -1av portage
+eselect python set python3.7
+nano -w /etc/locale.gen
+locale-gen
+date 10180821
+echo "Europe/Berlin" > /etc/timezone
+rm /etc/localtime
+ln -s  /usr/share/zoneinfo/Europe/Berlin /etc/localtime
+emerge -1av gcc
+gcc-config 2
+. /etc/profile
+emerge -1av glibc
 </code>